DETAILED OCCUPATION DATA
51-9011 Chemical Equipment Operators and Tenders
Occupational Description:
Operate or tend equipment to control chemical changes or reactions in the processing of industrial or consumer products. Equipment used includes devulcanizers, steam-jacketed kettles, and reactor vessels. Excludes ?Chemical Plant and System Operators? (51-8091).| Percentiles | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Geography | Employment | Emp SE* | Mean | Mean SE* | 10th | 25th | Median | 75th | 90th |
| Northwest Minnesota | N/A | 34 | N/A | $2.82/hr | N/A | N/A | N/A | N/A | N/A |
| Minnesota | 1,020 | 103 | $22.57/hr | $0.61/hr | $15.72/hr | $17.76/hr | $21.98/hr | $27.25/hr | $31.16/hr |
| U S | 87,120 | 2,439 | $25.15/hr | $0.20/hr | $14.25/hr | $18.03/hr | $23.97/hr | $31.25/hr | $38.37/hr |
| *SE = Standard error, a measure of the statistical reliability of the estimate. | |||||||||
| ||||||||||||||||||||||||||||||||
Tasks for Chemical Equipment Operators and Tenders
- Sets and adjusts indicating, controlling, or timing devices, such as gauging instruments, thermostat, gas analyzers, or recording calorimeter.
- Adjusts controls to regulate temperature, pressure, and time of prescribed reaction, according to knowledge of equipment and process.
- Operates or tends auxiliary equipment, such as heaters, scrubbers, filters, or driers, to prepare or further process materials.
- Monitors gauges, recording instruments, flowmeters, or product to regulate or maintain specified conditions.
- Directs activities of workers assisting in control or verification of process or in unloading materials.
- Makes minor repairs and lubricates and maintains equipment, using hand tools.
- Records operational data such as temperature, pressure, ingredients used, processing time, or test results, in operating log.
- Flushes or cleans equipment, using steamhose or mechanical reamer.
- Draws samples of product and sends to laboratory for analysis.
- Tests sample for specific gravity, chemical characteristics, pH level, concentration, or viscosity.
- Patrols and inspects equipment or unit to detect leaks and malfunctions.
- Weighs or measures specified amounts of materials.
- Reads plant specifications to ascertain product, ingredient, and prescribed modifications of plant procedures.
- Dumps or scoops prescribed solid, granular, or powdered materials into equipment.
- Adds treating or neutralizing agent to product and pumps product through filter or centrifuge to remove impurities or precipitate product.
- Mixes chemicals according to proportion tables or prescribed formulas.
- Moves controls to adjust feed and flow of liquids and gases through equipment in specified sequence.
- Starts pumps, agitators, reactors, blowers, or automatic feed of materials.
- Opens valves or operates pumps to admit or drain specified amounts of materials, impurities, or treating agents to or from equipment.
- Starts pumps and agitators, turns valves, or moves controls of processing equipment to admit, transfer, filter, or mix chemicals.
- Loads specified amounts of chemicals into processing equipment.
- Weighs, measures, or mixes prescribed quantities of materials.
- Draws sample of products for analysis to aid in process adjustments and maintain production standards.
- Drains equipment and pumps water or other solution through to flush and clean tanks or equipment.
- Inventories supplies received and consumed.
- Assists other workers in preparing and maintaining equipment.
- Observes safety precautions to prevent fires and explosions.
- Notifies maintenance engineer of equipment malfunction.
- Records data in log from instruments and gauges concerning temperature, pressure, materials used, treating time, and shift production.
- Tests samples to determine specific gravity, composition, or acidity, using chemical test equipment such as hydrometer or pH meter.
- Replaces filtering media or makes minor repairs to equipment, using hand tools.
- Patrols work area to detect leaks and equipment malfunctions, and monitor operating conditions.
- Observes gauges, meters, and panel lights to monitor operating conditions, such as temperature or pressure.
- Adjusts valves or controls to maintain system within specified operating conditions.
