Occupational Employment Statistics
47-2051 Cement Masons and Concrete Finishers
Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints. Installers of mortarless segmental concrete masonry wall units are classified in "Landscaping and Groundskeeping Workers” (37- 3011).
Minnesota
| 3,380 | 446 | $33.90/hr | $23.72/hr | $28.76/hr | $31.94/hr | $40.74/hr | $45.57/hr |
Construction | 3,250 | $31.94/hr |
Manufacturing | N/A | N/A |
Professional and Business Services | 40 | $34.39/hr |
Education and Health Services | N/A | N/A |
Public Administration | 30 | $42.99/hr |
Plasterers and Stucco Masons
| 90 | $43.71/hr | 9.0% |
Helpers--Brickmasons, Blockmasons, Stonemasons, and Tile and Marble Setters
| N/A | N/A | N/A |
Roustabouts, Oil and Gas
| N/A | N/A | N/A |
Helpers--Production Workers
| 3,150 | $19.57/hr | -6.3% |
Construction Laborers
| 24,540 | $27.45/hr | 8.3% |
Insulation Workers, Floor, Ceiling, and Wall
| 1,230 | $25.02/hr | 7.3% |
Roofers
| 1,930 | $31.08/hr | 5.6% |
Drywall and Ceiling Tile Installers
| 680 | $30.23/hr | 5.8% |
- Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
- Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
- Check the forms that hold the concrete to see that they are properly constructed.
- Mold expansion joints and edges, using edging tools, jointers, and straightedge.
- Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
- Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
- Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
- Fabricate concrete beams, columns, and panels.
- Waterproof or restore concrete surfaces, using appropriate compounds.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.